• pic_02

    Cart
  • pic_02

    Login
    • HOME
    • MX150 Terminal 0330123002: Complete Specs & Benchmarks

    MX150 Terminal 0330123002: Complete Specs & Benchmarks

    MX150 Terminal 0330123002: Complete Specifications & Benchmarks

    A comprehensive, data-driven analysis of thermal performance, electrical characteristics, and industrial installation standards.

    Field and laboratory tests for MX150-style terminals consistently demonstrate stable performance up to 20–22 A in 20–18 AWG applications under rated conditions. This analysis serves as a single-source technical guide for the MX150 Terminal 0330123002, covering benchmarks, installation best practices, and Quality Assurance checklists.

    Background & Product Overview

    MX150 Terminal 0330123002 Technical Diagram

    The MX150 Terminal Family

    The MX150 series features a 1.50 mm blade-style design optimized for compact wire-to-wire and wire-to-device connections. These terminals are engineered for both sealed and unsealed environments, balancing a small form factor with robust current handling for high-density automotive and industrial harnesses.

    0330123002 Classification

    The 0330123002 is the female/receptacle variant specifically designed for 20–18 AWG wires and mat-sealed connector applications. It is compatible with crimp termination and is ideal for mid-harness connections where moisture protection and consistent signal integrity are paramount.

    Electrical & Mechanical Performance Benchmarks

    Current Rating Capability by Wire Gauge (Amperes)

    18 AWG
    22A (Max Rated)
    20 AWG
    20A (Steady State)

    Parameter Specification Details Typical Result
    Contact Resistance Measured in milliohms (mΩ) Low mΩ Range
    Operating Temp Thermal profiling under load -40°C to +125°C
    Base Material High-conductivity Copper Alloy Tin (Sn) Plated
    Mating Force Blade insertion into receptacle < 5.0 N Typical

    !
    Crimping & Wire Prep

    • •
      Precise Strip Length: Ensure full conductor insertion without insulation interference.
    • •
      Die Matching: Use only calibrated crimp tools matched to MX150 geometries.
    • •
      Visual Verification: Inspect for visible barrel deformation and avoid wire nicking.
    • •
      Pull-Out Force: Maintain consistent mechanical bite to prevent electrical failure.

    ✓
    Sealing & Assembly

    • •
      Mat-Seal Orientation: Critical for environmental integrity; verify seal seat depth.
    • •
      TPA Engagement: Ensure Terminal Position Assurance (TPA) is fully locked.
    • •
      Vibration Tolerance: Secure housing to prevent terminal fretting in high-vibration zones.
    • •
      Ingress Protection: Ideal for damp locations where unsealed terminals might corrode.

    Procurement & Quality Assurance

    Inspection Checklist




    SEO & Technical Context

    When listing this product, focus on long-tail phrases like "MX150 sealed receptacle 18 AWG" and "0330123002 crimp specifications." Ensure meta descriptions include current ratings (22A) and compatible AWG ranges to capture technical search intent accurately.

    Key Summary

    0330123002 is a 20–18 AWG MX150 terminal designed for mat-sealed applications; verify crimp barrel dimensions and seal orientation during assembly.

    Electrical ratings (~22 A) must be validated with voltage-drop and thermal-rise testing; derate performance for high ambient temperatures.

    Maintain lot traceability and perform sample pull-tests to ensure long-term reliability in automotive or industrial environments.

    Frequently Asked Questions

    Is 0330123002 rated for 22 A in 18 AWG installations?
    +
    Yes, typical datasheet conditions and bench tests support steady performance near 22 A for properly crimped 18 AWG conductors. Achieving this rating requires a correct crimp die, full conductor insertion, and validation by voltage-drop tests in the final assembly.
    How should I crimp and inspect 0330123002 terminals?
    +
    Required steps include using a matched crimp die and ensuring specific strip lengths. Inspect for barrel swage, conductor bite, and ensure no insulation enters the crimp zone. It is essential to perform pull tests during initial setup and at regular intervals.
    What QA samples are recommended for these lots?
    +
    We recommend lot sampling that includes crimp-pull tests, dimensional checks, contact resistance measurements, and plating thickness verification. Environmental stress tests (like thermal cycling) are strongly advised for critical automotive or outdoor industrial applications.